What Equipment is Used for Manganese Ore Beneficiation

Overview

Manganese ore is mainly divided into manganese oxide and manganese carbonate. The beneficiation method of manganese oxide ore is mainly gravity beneficiation, supplemented by strong magnetic separation. The gravity beneficiation equipment used for the gravity beneficiation of manganese oxide ore is mainly a jig. Most of the manganese carbonate ore is fine-grained, and the specific gravity difference between the manganese mineral and the waste rock is very small. It is difficult to separate by the method of gravity beneficiation, but for those with large embedded particle size and a clear boundary between the gangue and the gangue. Manganese carbonate ore can also be beneficiated and purified with a jig machine.

So what are the types of manganese ore jigs? What is a manganese ore jig? As a professional mining diaphragm jigging machine manufacturer, Gongyi Furui Machinery Factory is here to share several manganese ore beneficiation jigs for your reference.

Manganese ore beneficiation production line

The jig machine is the most ideal equipment for the beneficiation and purification of manganese ore, and it is widely used in the field of manganese ore beneficiation. However, there are many different types of jigs. In order to obtain the most ideal beneficiation effect, the beneficiation process and equipment configuration must be determined according to the nature of the ore.

Therefore, Gongyi Furui Machinery Factory has specially designed a manganese ore jigging machine laboratory. We can carry out manganese ore jigging and beneficiation tests for customers free of charge, as well as design the beneficiation process and equipment configuration. The following is the manganese ore beneficiation production line we designed for our customers.

1. Malaysia manganese ore beneficiation production line

Malaysia’s manganese ore beneficiation production line mainly adopts the processes of drum washing machine, jaw crusher crushing, circular vibrating screen screening, jig machine gravity beneficiation, and dehydration screen dewatering. The grade of raw manganese ore is about 30%, and the grade of concentrate reaches 48-52% after processing by the Ferui Machinery manganese ore beneficiation production line, and the recovery rate is 86%.

Using this production line for manganese ore beneficiation can complete the task of manganese ore beneficiation with a daily processing capacity of about 1,500 tons. The final beneficiation result fully meets the requirements of customers and is well received by customers.

2. Indonesia manganese ore beneficiation production line

The Indonesian manganese ore beneficiation production line adopts the process flow of jaw crusher coarse crushing, circular vibrating screen screening, jig machine gravity beneficiation, and dehydration screen dewatering. The grade of raw manganese ore is about 28%, and the grade of manganese ore concentrate reaches 46-50% after the beneficiation and purification of our manganese ore beneficiation production line.

We have designed and used 3 ore beneficiation production lines in total, which can complete the beneficiation task of manganese ore with a daily processing capacity of about 3,000 tons. The various beneficiation indicators obtained have met the expectations of customers and have been highly recognized by customers.

Manganese Ore Processing Equipment

Manganese ore jigging machines are mainly designed for the properties of manganese oxide ore. Commonly used manganese ore beneficiating jigging machines mainly include the following three types.

1, 2LTC-6109/8T jigging machine

2LTC-6109/8T jigging machine is also called trapezoidal jigging machine. This machine is a double-row eight-chamber trapezoidal jigging machine with narrow inlet, wide outlet, and trapezoidal jigging surface. The famous trapezoidal jig, this machine is mainly used to process medium and fine-grained manganese oxide or manganese carbonate ores. It has high beneficiation efficiency and good beneficiation effect. It is used in large and medium-sized manganese ore gravity beneficiation plants at home and abroad. The beneficiation effect Recognized and praised by customers, the following is the picture of the trapezoidal jig:

2. AM30 jigging machine

AM30 jigging machine, also known as large particle jigging machine, is mainly used to process coarse-grained manganese ore of 8-30mm size. This machine is independently developed and designed by my country. At first, it was used to process Gushan iron ore. Rui Machinery’s improvements and innovations have been extended to the field of manganese ore, iron ore, barite, fluorite, celestite and other mineral beneficiation fields. It has the characteristics of large selected particle size and high separation efficiency, especially for coarse-grained manganese. The ore beneficiation effect is excellent, reduces the labor intensity of manual manual separation of coarse-grained manganese ore, and improves the beneficiation index and efficiency. It is widely used in large and medium-sized manganese ore concentrators at home and abroad. The following is a picture of a large particle jig:

3. LTA series jigging machine

The LTA series jigging machine is also known as the bottom-moving conical diaphragm jigging machine. This machine is a single-row double-chamber bottom-moving jigging machine. It is mainly used to process medium and fine-grained manganese ore and is effectively selected into the 0- 8mm, it is ideal equipment for small and medium-sized manganese ore gravity concentrators. The following is the picture of the LTA series jig machine:

Gongyi Forui Machinery Factory, founded in 1986. We are one of the leading suppliers of beneficiation equipment in Asia. We can design and manufacture professional tantalum-niobium ore processing equipment for you. Welcome to visit our company. We are dedicated to serving you! If you need equipment quotation and process flow, please feel free to Contact Us:

• Whatsapp: +8618026978087
• Email: asa.guo@foruimining.com